All Orders Over $25
Millermatic 190 MIG Welder 907613
On Sale! $969.00
Call to Buy
Millermatic® 190 MIG Welder with Auto-Set 907613
The Millermatic® 190 MIG welder is a 190 amp portable MIG welder that runs on 240 volt input current and weighs only 35 pounds. It features inverter technology, which means it draws less power, has a superior welding arc and weighs up to 40% less than other MIG welders in its class. The Milermatic 190 is capable of MIG welding mild steel up to 5/16 inch thick. It features Auto-Set, which eliminates the guesswork of setting voltage and wire feed speed for your MIG welding application. Simply select the material thickness and wire diameter while the welder is in the Auto-Set mode, and you are ready to weld. The Auto-Set control automatically sets your welder to the proper parameters. It is available when welding mild steel with solid wire and only works with .024 and .030 solid wires and C25 shielding gas (75% Argon, 25% CO2).
Manual MIG welding control is also available for those welders who wish to fine tune their welding arc. Manual welding mode must also be used when MIG welding aluminum, stainless steel or for flux-cored welding. The parameter door chart lists voltage and wire feed speed settings options.
Flux Cored (FCAW) (gas and self-shielded)
Light Industrial Applications
Maintenance and Repair
automatically provides the right settings to weld mild steel while infinite voltage control allows the flexibility to manually set your own parameters.
Set the wire diameter, a blue light shows Auto-Set is activated
Dial in the thickness of what you are welding
Start welding with the exact parameters you need!
Miller inverter technology
combines best-in-class arc characteristics with the portability of a 35-pound machine. The arc is extremely forgiving to variations in arc length and travel speeds
Angled cast-aluminum drive system
with calibrated tension knob creates consistent feeding and easy setup for up to 15-foot MIG guns.
drive roll makes setup quicker by offering three grooves, two for different size solid wire and a third for flux-cored welding wire.
Auto Spoolgun Detect™
automatically detects when a MIG gun or spool gun is connected eliminating the need for a switch.
provides a smooth, spatter-free start. It is the best-starting machine in the small MIG machine category.
Thermal overload protection
shuts down unit and activates the over temperature light if airflow is blocked or duty cycle is exceeded. Automatically resets when unit cools.
Uses 4 inch or 8 inch (102 or 203 mm) spools
and can be set up to weld with .024 to .030 inch (0.6 to 0.8 mm) solid wire and .030 to .035 inch (0.8 to 0.9 mm) flux-cored wire.
Comes complete with:
Millermatic® 190 MIG Welding Power source
6.5-ft. (2 m) power cord with plug
10-ft. (3 m), M-100 MIG gun and cable assembly
10-ft. (3 m) work cable with clamp
Argon - Argon/CO2 mix flow gauge regulator with gas hose
Hobart® spool of .030-in. (0.8 mm) solid wire
Two contact tips for .030-in. (0.8 mm) wire
Quick Select® drive rolls for .024-in. (0.6 mm) or .030/.035-in. (0.8/0.9 mm) solid wire, and .030/.035-in. (0.8/0.9 mm) flux-cored wire
Material thickness gauge #229 895
Velcro cord wraps
Download Millermatic 190 Spec Sheet (Requires Adobe Acrobat Reader)
Download Millermatic 190 Spec Sheet (Requires Adobe Acrobat Reader)
Millermatic 190 MIG Welder 907613
Stars based on
Write a Review
By Jeff S.
June 21, 2017
Best deal around... really quick shipping and awesome products... You want a welder to do it all, I highly recommend the 190.
April 17, 2017
Machine works flawlessly. Cyberweld, very easy to do business with.
I love it
March 26, 2017
I am a homeowner and hobbyist welder. I have a few projects coming up for the Miller 190 to include welding Ramps for a gooseneck trailer. I have the initial welds just to set it up. Then grabbed some old saw blades and welded them together. They are about 1/8 thick. I have never used the auto set feature so I dialed it in according to the Miller preferred settings. It welded perfectly. I also attempted to get the machine warm but I could not get the temp light to come on. I welded 4 runs on a high enough setting that it was about to melt through the saw blades at a moderate pace. The runs were over 7" long and heavy. The light never came on. It just laid it down! I would highly recommend this Miller 190. The uses for this machine wouldn't include industrial welding though. If I wanted to do some heavier steel I would recommend the 252. Bang for the buck on lighter steel i.e. 1/4 and below Miller 190.
By Steven S.
July 24, 2016
First use was for my Aluminum Spool gun. Ran perfectly.
By Jay R.
January 13, 2016
Leads could be a little longer, but it welds amazingly.
A Quality Built Machine
November 30, 2015
Order was shipped complete and it arrived in a timely manner. Instructions were complete and it was easy to assemble.
Quality construction. Light weight and quite.
Nice heavy duty welder but light in weight
April 16, 2015
It's my first 220V mig welder and I'm certainly impressed with it's ability to weld heavy metals.
Easily set up. Instructions were good.
the auto set feature seems to feed the wire too fast. It just might be taking some getting used to
Millermatic 190 - I LOVE THIS MACHINE
March 30, 2015
I love this welder. Smooth, clean, and consistent welds. It is compact and light weight but offers plenty of power. I wish I had pulled the trigger and purchased this last year. I have been asking every one I know for welding projects just to have a reason to us it. Long torch assembly gives you plenty of reach.
Plenty of Power for its class Smooth Arc Consistent Wire Feed Light Weight Affordable
January 22, 2015
I bought this welder to upgrade from a 110v unit, where I kept running up against the duty cycle. I had been looking at good quality MIGs for awhile and when I saw this 220v autoset unit come out with inverter based technology, I jumped on it...and I'm so glad I did!!! I haven't stopped welding with this machine since I got it. On Saturday, I purposely pushed it HARD...I was welding sides in a trailer, and welded for 2 hours straight with no more than 10 minutes of down time...this welder never missed a beat, and the overtemp light never came on, despite me pushing it hard on purpose. Not only that, but the quality of welds with this machine ate so much better than the unit it replaced.
Autoset works great, lightweight, extremely forgiving, exceptional duty cycle...and a great value through CyberWeld!!
None at all
December 18, 2014
Set up went fast and the unit welds as I expected it to. The lighter weight of this unit allows me to be mobile if a family member or friend needs something repaired. I've used both the auto-set and manual functions and can see very little, if any, difference in the finished welds. This unit is a replacement for an older 180 with only 5 fixed heat settings. This does a superior weld on auto-set yet it allows me more control in manual mode if I'm welding different thicknesses of metal.
Weight is the primary plus for me.
Salt Lake City, Utah
This is almost like cheating!
December 10, 2014
I'm by no means an experienced welder. But this welder almost makes me look like one. It starts very politely and the the weld flows like cream.
Small Light Fan only comes on as needed Changing wire sizes is a two minute job The arc is very tolerant of changes in stick out
Ask & Answer
(11 Questions & 11 Answers)
Ask a Question
from chicago area IL asked:
November 20, 2015
Is the price of 896.00 (for a 190 Mig welder 907613) before the Rebate or after Rebate
Millermatic 190 MIG Welder 907613 is priced at $896.00 before the rebate
on November 23, 2015
from GREENWOOD asked:
November 16, 2015
Do I have to use a different liner than the one that comes with it to use .024 solid wire? I see three liner sizes available for this machine. Can a liner be reinstalled after it has been removed from a gun and hose?
The Millermatic 190 MIG Welder 907613 comes with a standard with a .030 to .035 liner.In most cases you can run .024 wire through this liner. If you are going to run .024 on a regular basis you may what to install a .024 liner. The .024 wire will run smoother with .024 liner and it will help prevent the wire from binding inside the liner.All three liner sizes can be installed in the M-100 gun that comes with the machine. Liners can be removed and reinstalled as needed.
on November 16, 2015
from Tomball, tx asked:
July 15, 2015
Is this machine capable of using the multi voltage plug? Like the millermatic 211
The Millermatic 190 MIG Welder 907613 is a 220 volt machine only and it cannot use the multi voltage plugs
on July 16, 2015
from Virginia asked:
June 19, 2015
May I use .035 solid wire with th auto set feature
The Auto Set feature on the Millermatic 190 MIG Welder 907613 will not work with .035 wire
on June 22, 2015
from Chicago asked:
April 27, 2015
What power generator do I need?
If you are going to run the Millermatic 190 MIG Welder 907613 off of a generator you will need a generator that is 3.8 KW or larger
on April 28, 2015
from Michigan asked:
April 14, 2015
Will it run on 220 ? perform the same as 240 ?
The Millermatic 190 MIG Welder 907613 is an inverter based welder. It will perform the same on 220 as it does on 240.. It will have a slightly higher input power draw on 220 volt as compared to on 240 volt.
on April 15, 2015
from DES MOINES, IOWA asked:
April 7, 2015
I AM 92 YEARS OLD AND I DO NOT HAVE A CREDIT CARD. DO YOU HAVE A WAY TO INSTANTLY CHECK PERSONAL CHECKS WITH THE BANK? OR DO YOU ACCEPT MONEY ORDERS? MY SON COULD USE HIS CREDIT CARD. PLEASE ADVISE. NEED YOUR ADDRESS
If you want to purchase a machine like the Millermatic 190 MIG Welder 907613 by check or money order you will need to place your order by phone. We will generate your order and provide you with an order number.. You would then send us a check /money order with the order number written on the check/money order. When we receive the check/money order we will wait until the check/money order clears. Once it clears we will ship your order
on April 8, 2015
from des moines, iowa asked:
April 5, 2015
if I buy millermatic 190 for $896.00 and buy spoolmatic 100 for $246.00---total$1142.00 do I get $200.00 rebate?
If you purchase the Millermatic 190 MIG Welder 907613 and the optional Miller Spoolmate 100 MIG Spoolgun 300371 you would qualify for the $200.00 rebate
on April 6, 2015
from Canada asked:
January 28, 2015
Which type of receptacle do I need for this welder? (can you provide a part#?)
The Millermatic 190 MIG Welder 907613 uses a NEMA 6-50 plug.. We do offer the Cooper Primary Power Receptacle - 230 Volt NEMA 6.50R 1252 ($16.87) which can be used with the 190.
on January 29, 2015
from Rochester NY asked:
December 18, 2014
In the description of this welding machine it's said that it can weld up to 5/16" steel plate and I am assuming this means welding with flux cored wire. My question is does this machine weld up to a max thickness of 5/16" on a single weld pass or does this mean it can weld steel this thick doing multiple passes? If this welding machine cannot weld up to 5/16" steel on a single weld pass then what is the max steel thickness that the miller 190 can weld on a single weld pass?
The Millermatic 190 MIG Welder 907613 can weld up to 5/16" thick using solid wire with a shielding gas or with flux cored wire.. It can weld thicker using multiple passes
on December 19, 2014
from firstname.lastname@example.org asked:
November 12, 2014
How do I find out what the ($100) qualifying additional products are if I buy a 190 mig welder? Also what would be the the rebate from Miller during their promo?
In order to participate in the Miller rebate program for the Millermatic 190 MIG Welder 907613 you will have to purchase the machine for $895.00. On this same order you will have to also purchase $100.00 of Miller family accessories. This can be any item including machines branded Miller, Hobart, Weldcraft, Smith, or Bernard . Any item.. Welding helmets, gloves, welding wire, torches, tips, nozzles. Any item. .Once you have made this purchase you will need to fill out the Miller rebate form and send it to Miller along with a copy of your purchase receipt. Miller will send you a check for $100 within a few weeks. Basically you receive the accessories for free .. There is no rebate discount on the price of the Millermatic 190
on November 12, 2014
*Check box on right to select
Miller Spoolmate 100 MIG Spoolgun 300371
Mfg Industrial Price:
Millermatic Protective Cover 301262
Miller Running Gear/Cylinder Rack 301239
Miller .024 MIG Consumable Kit 234607
Miller .030 MIG Consumable Kit 234608
Miller .035 MIG Consumable Kit 234609
Call us toll free
Business Hours: M-F 7:30-7:30 EDT
Keep track with us!
VIEW FULL SITE
Copyright © 2017 Cyberweld
All Rights Reserved.
The Cyberweld© name, logo and the slogan "Weld with your mouse"© are registered service marks of J.W. Goodliffe & Son, Inc.
Welders & Plasma Cutters
Welding Helmets & Safety
Gas Apparatus & Cylinders
Welding Wire & Electrode
Shop All Brands