All Orders Over $25
Millermatic 212 MIG Welder Auto-Set 907405
On Sale! $1,999.00
-FREE Fall Promo-:
FREE Miller Performance Welding Helmet ($244 MSRP Value)
OR $100 Instant Savings Discount (-$100.00)
Call to Buy
Get a FREE Miller® Performance™ auto-darkening welding helmet ($244 MSRP value) with purchase.
Millermatic 212 Auto-Set MIG welder is a complete MIG welding package that welds material from 22 gauge up to 3/8 in (9.5 mm).
The Millermatic® 212 Auto-Set MIG welder is a complete MIG welding package that welds material from 22 gauge up to 3/8 in (9.5 mm). It's easy to set up, offers a wide window of operation, and delivers 210 amps of power for semi-industrial applications. The Millermatic® 212 offers superior performance on thin and medium gauge metals, with smooth arc characteristics throughout its operating range.
With single-phase power plus a factory-installed running gear/dual cylinder rack, the Millermatic® 212 Auto-Set easily goes where it's needed. The system adds efficiency and productivity to light fabrication work, garage/body shops, and farms and ranches. Its cost and operating economics make it a smart choice. Its ease of use makes it a very effective machine for the hobbyist.
Flux Cored (FCAW)
Garages/ Body Shops
Farm and Ranch
is a breakthrough control that automatically sets your welder to the proper parameters. Auto-Set makes set up very simple and gives you precise settings instantly. Manual Mode allows you to manually set weld parameters for broader applications.
Infinite voltage control
replaces "tap" settings which means you can now "dial in" precise weld voltage and wirefeed speed when using the Manual Mode.
Compatible with Spoolmate 200 spool gun!
The Spoolmate 200 with wire feed speed control on the gun saves time for the operator by eliminating the need to go back to the machine to change the spool gun wirefeed speed.
Line Voltage Compensation
keeps welding output constant even if power input varies by +/- 10%.
No more replacing mechanical output contactors.
Our built-in solid-state contactor circuit makes wire electrically "cold" until the trigger is pulled, and gives you life-long welding output and performance.
Reduce Maintenance and Operating Costs with our Fan-On-Demand™
cooling system that only operates when needed, reducing power consumption and contaminants drawn into the machine.
EZ-Access™ Consumable Compartment and Parameter Chart -
convenient new flip-down compartment that provides fast access to parameter chart and consumables.
Larger work area -
now with longer 15-ft M-25 gun.
EZ-Change™ Low Cylinder Rack
allows operators to easily roll cylinders on and off of rack - no need to lift cylinders.
Compatible with Bobcat™ welder/generators.
Comes complete with:
Millermatic® 212 MIG Welding Power Source
10 ft (3 m) power cord and plug
15 ft (4.6m), 250 amp M-25 MIG gun for .030/.035 in wire
10 ft (3 m) work cable and clamp
Factory-installed dual gas solenoids
Argon mix regulator/flow gauge w/hose
Factory-installed running gear with EZ-Change™ Low Cylinder Rack
.030/.035 in reversible drive rolls
Extra contact tips
FREE Miller® Digital Performance™ auto-darkening welding hood. (Expires 12/31/17)
Get a FREE Miller® Digital Performance™ Black auto-darkening welding helmet ($244 MSRP Value) with purchase of a Miller® Millermatic® 212 MIG welder. Helmet is shipped with welder. Expires 12/31/17. (No substitutions allowed.)
Digital Performance™ Features
Digital Controls With Three Operating Modes -
Weld Mode™ Shades #8 - 13
Cut Mode™ Shades #5 - 8
Grind Mode - Light State #3
features additional adjust-ability settings for better fit & comfort
front cover lens assembly
Comes complete with
5 outside cover lenses
2 inside cover lenses
Three year warranty
Download Millermatic 212 Spec Sheet (Requires Adobe Acrobat Reader)
Download Millermatic 212 Spec Sheet (Requires Adobe Acrobat Reader)
Write a Review
Millermatic 212 MIG Welder Auto-Set 907405
96% Recommend this product
of 26 responses)
By Jake A.
January 30, 2017
works great like a welder should
easy to get out of the box and right to work
none I can see
By Dale W.
Fort Pierce, FL.
December 22, 2016
Great machine, great price, fast delivery.
I love it. We rarely deal with anything over 1/4", but I prefer to have a machine that has a greater capacity than I need.
Miller welders are the best. I have purchased 3 migs, and 2 tigs in the past 26 years for my restoration shop. The migs have rolled many miles of wire without any problems ever. I only replace them for insurance sake, and keep 2 at all times. Cyberweld has the best prices, and fast, free delivery can't be beat. I just bought my new Miller 212 this month (Dec. 2016)
By Sam B.
August 11, 2016
Right out of the box, it worked excellent!!
By DEB J.
PALM SPRINGS, CA
July 22, 2016
EVERYTHING IS GREAT
We got the delivery when promised and Miller makes a great product
June 25, 2016
Arrived in perfect shape, best price, only negative was the person delivering it.
Cedar Park, Tx
June 20, 2016
Extremely pleased. The welder works great and exceeds all my expectations! Whether I'm welding thick steel plate or installing patch panels on another classic truck project, my Miller 212 steps up to task without hesitation! Once again, Miller has met and exceeded my expectations!
The ability to switch between auto-set and manual mode makes for greater versatility. The run-in setting is really nice once I had it set to my preferences. It comes set as 50% from the factory.
I didn't buy it sooner!
February 28, 2016
really good product
I'm very happy with the product ID recommend it to anyone
Just wish power cord was a little longer and a way to store leads. Don't let that stop you from purchasing
By Scott V.
December 28, 2015
Great product delivered in perfect shape....
Great, fast service and quick delivery.
December 24, 2015
This welder is everything the description says it is and more. Can't gone wrong with this purchase. Plus CYBERWELD was excellent with shipping information and timely delivery.
December 15, 2015
Great product for the price and FREE shipping! Thank you.
Corpus Christi, Tx.
December 3, 2015
Long time Miller user
It is absolutely everything Miller says it is. Well worth the price. Cyberweld delivered on price and on time and was very prompt with rebate paperwork. Will definitely use them again.
Wish it had a better way of storing cables like some of the older Millermatics.
November 9, 2015
Great mig welder
This welder was easy to setup and was welding with it quickly.
Auto set is a great feature. easy to use and welds great!!!! Great purchase
Flathead lake montana
September 2, 2015
Great machine - makes me weld like a pro
My miller 212 is the perfect set for a hobbiest and arrived on a pallet, set up was easy 20 min from box to welding.
Easy set up and use
220 line could be longer, all lines would be more convenient if 3 or 4 ft longer
August 13, 2015
Great product but terrible shipping.
Item exactly as described. Emailed for an eta on shipping and gave my zip code. Was told it would take about 3 days being I was in Texas and it shipped from in state. Took over two weeks due to first carrier subbing it out to another carrier. Be careful if you are in a hurry. This aside, good product, great price, and customer service that responds quickly.
Price, free shipping
Chihuahuan Desert, USA
March 13, 2015
Love this machine!
I burned a few miles of wire using commercial MIG machines in a farm equipment plant while in college. Having that experience, I wasn't expecting much from the little Millermatic 212. That turned out to be wrong. I found this machine to be easy to set up, and a dream to use. The commercial equipment I was familiar with were strictly manual adjustment machines so, again, I was skeptical of this Auto-Set business. That also turned out to be wrong. I was pleased to discover how well the Auto-Set feature works. Dialing in the wire dimension and base metal thickness is giving me close to perfect welds with only minor tweaking, if any.The only thing I found irritating about this machine was the Mickey Mouse method Miller provides for accommodating small wire spools. I set this machine up on Sunday and I all had was a 2 lb. spool. Unfortunately, I could not find a local source of 10 or 11 pound spools. Miller's solution is to remove most of the spool hub parts and replace them with a 2" piece of PVC. I didn't have the right diameter PVC so had to beg a piece from my neighbor, which fit the 2# spool but was a loose fit on the spindle. It worked, but reminds me of using knock-off parts on a BMW. Miller might want to consider at least providing the dimensionally correct PVC with the machine. This is admittedly a minor whine, but it just seemed cheesy to me. Oh, I should point out that CyberWeld did a great job getting the machine to me on time and in one piece.
March 5, 2015
This is an Awesome machine.
I was given this welder for my birthday 2 years ago. I have used the hell out of it, and it has performed flawlessly.
Easy set controls, easy set up, and the aluminum spool gun operates very well on this unit.
I wish all welders came with a better way to store the ground and feed cord.
August 15, 2014
Cant go wrong
Great price, great unit, can not ask for much more!
July 3, 2014
Very Happy with my welder
have had this welder for about 2 yrs. now, still feel that it was a good investment. Had a little trouble with a circuit about 3 months after i got it,but had it repaired and no trouble since. Also purchased the 140/120volt model,and it does a great job too.
One of the best welders today
March 26, 2014
Used it yesterday for the first time. I am very happy with the product. Duty cycle was important to me and this machine is doing the job for me.
November 15, 2013
Very satisfied with this item.
June 15, 2013
I purchased this machine to do repairs on my construction equipment and trailers it has more than paid for its self, I don't have any formal training but it made welding easy and affordable, I built a attachment for my Bobcat and I welded for 2 hours on it highest setting and it never hit the thermal overload and got the job done. I used the attachment to demo concrete slab and had a piece 5'X7' 4" thick and looked at all welds no problems, great machine would tell any one to buy Miller.
very simple to use the Auto-Set and weld
cant think of any
February 1, 2013
This review deals mainly with the Cyberweld buying experience, which I rate a 10 star evaluation. Everything ordered was delivered and packaged well enough to avoid damage. Cyberweld has a lot of merchandise to pick from, the price and shipping are without equal. All in all a great buying experience. I bought the miller212 with the spool gun and it arrived in 5 days dropped shipped from Cal to AZ with no damage. The assembly of the dual cylinder cart was a pita due to crappy instructions and miss identified threads on the fasteners and the heads of the fasteners being 3 different sizes. Gimme a break! Also the ground clamp (made in china) is a real cheapie, but easily replaced with a Twecko copper ground clamp bought from Cyberweld!!! But that is a Miller problem.....Not Cyberweld. Would I buy from Cyberweld again? You betcha.....as a matter of fact I look forward to it!
By Kim H. Osborne (male)
October 8, 2012
Owner of the welder.
The unit is much more robust that the last unit I owner. The operation is quieter and mobility is excellent. I am much more pleased with this welder.
1) Mobility - bottles and all on one carriage. 2) Ease of operation. 3) Better duty cycle.
Nothing so far.
Texas City Tx
August 30, 2012
thank you cyberweld for fast shipping. i got the machine before there delivery date. the only thing now is that i bought the machine about a month ago. i did not used it as soon as it arrive. i left it on the crate for 3 weeks and the day i used it, i notice that the rear wheel did not have the locks. and the wheels kept falling off. then after 30 minutes the spool gun started squirting wire by itself before it quit welding. i turned it off and look it up on the owners manuel i did not find anything on the trouble shooting section so i called miller and they told me to take it to the service center its been a week and they havent fix/replace it. it very frustrating that i spend that kind of money on a welder that i cannot use. the miller service center said it would be another week before they would get to it. if i would of known that miller did not take care of there customers i would of gone a different route.
Fast freindly service from cyber weld
They are trying to fix a lemon machine that clearly should be replace
July 25, 2012
Great Mig Welder, Takes a little while to get it dialed in.
July 23, 2012
Always recommend Miller products
The MIG is used mostly for assembly of cranks on a volunteer project involving a 3 wheel hand cranked wheelchair for leg handicapped people. (giftofmobility.org) In addition I do general job shop projects such as make antique motorcycle parts. Since some work is delicate, I bought the smaller MIG torch for greater flexibility. I am very pleased with Miller products and always recommend them.
Ask & Answer
(28 Questions & 28 Answers)
Ask a Question
from Sandy hook CT asked:
June 19, 2017
I currently own a Bobcat 250 NT welder, will this have a stable enough power output to run a 212 MIG machine or should I consider a purchasing a 12vs and running it off the welder output? Thanks John
Millermatic 212 MIG Welder Auto-Set 907405 would run of your Bobcat. The 212 is the biggest machine miller recommends running off a Bobcat.
on June 19, 2017
from denver colorado asked:
November 5, 2016
what is the warranty on this unit
The Millermatic 212 MIG Welder Auto-Set 907405 has a 3 year warranty through Miller.
on November 22, 2016
from Minnesota asked:
August 26, 2016
would this be the direct replacement for my 35s
The Millermatic 212 MIG Welder Auto-Set 907405 would be a good replacement for a Millermatic 35s. I believe that the 35S was only 150 amp machine . The 212 has a max output of 210 amps.
on August 26, 2016
from Memphis, TN asked:
February 27, 2016
What happens if something happens to the welder during transport?
We suggest that when you purchase a Millermatic 212 MIG Welder Auto-Set 907405 or any product that we sell that you open the carton and inspect the product immediately.Do not allow the delivery person to leave until you have completed your inspection. if the product is damaged refuse the shipment. Then contact us immediately.
on February 29, 2016
from Long Island NY asked:
February 12, 2016
would i be able to weld a trailer hitch for a 10,000 lb tandem skid steer trailer on my truck with this or do i need the 252
You did not indicate the thickness of the materials you will be welding.. If the material is 3/8" or less the Millermatic 212 MIG Welder Auto-Set 907405 can weld it with one pass.. If the material is thicker than that you may want to consider a Millermatic 252
on February 16, 2016
from Lake Bluff, Illinois asked:
December 4, 2015
Hi, I was wondering if you guys offer any form of financing or payment plans for companies? Thank you.
We do not offer any payment plans . You may want to look into the Pay Pal Bill Me Later program
on December 7, 2015
from Joplin mo asked:
October 12, 2015
Does it have a setting for aluminum
The Auto Set feature on the Millermatic 212 MIG Welder Auto-Set 907405 is designed to work only with steel. It will not work with aluminum.
on October 13, 2015
from el paso tx asked:
July 28, 2015
I purchased my Millermatic 212 and it just arrived how do I go about receiving my rebate
Your Millermatic 212 MIG Welder Auto-Set 907405 was shipped to you directly from Miller.. Your receipt and rebate form has been sent to you by US Mail and you be receiving it shortly. Once you receive the rebate form complete it and send it to Miller along with a copy of the receipt. You will receive a rebate check from Miller in 4 to 6 weeksd
on July 29, 2015
from California asked:
March 31, 2015
I'm considering the Millermatic 212 vs the Hobart Handler 230. What are the advantages of the Miller and the Hobart?
The Millermatic 212 MIG Welder Auto-Set 907405 and the Hobart Ironman 230 MIG Welder 500536 are comparable .. Hobart has a little more power than the Miller.. The duty cycle on the Hobart is 60% @ 175 amps.. The Miller duty cycle is 60% @ 160 amps. The max output for the Hobart is 250 amps while the Miller is 210 amps.The Hobart has a 12 position tap switch for voltage control.. The voltage control on the Miller is infinitely variable which provides more precise control .. The Miller also has Auto Set which automatically sets the wire feed speed and voltage parameters. The Hobart does not have Auto Set feature The Hobart Mig Gun is 15ft rated at 200amps.. the Miller Mig Gun is also 15ft long but is heavier duty gun rated at 250 amps.Both machines are spool gun ready. The recommended spool gun for the Hobart is the Hobart DP 3545-20 while the recommended Miller spool gun is the heavier duty Spoolmate 200
on April 1, 2015
from bloomfield, kentucky asked:
January 26, 2015
Can this welder weld stainless steel and if so how thick
Miller indicates that you can weld up to 3/8" type 308 stainless with the Millermatic 212 MIG Welder Auto-Set 907405
on January 26, 2015
from Central Washington asked:
January 19, 2015
I'd like to have the flexibility to use the MM 212 remotely, while using my portable generator as the power source. The 212 power cord terminates with a NEMA 6-50 plug and my generator includes a 240v NEMA L14-30 (30amp, twist-lock) outlet. If I [have my qualified electrician] make up a pigtail to adapt from the 212's NEMA 6-50 plug to the generator's NEMA L14-30 outlet, will I be good to go?
You did not indicate the KW rating of your generator. The Millermatic 212 MIG Welder Auto-Set 907405 will require 5.5 kw in order to operate.. On 230 volt the unit will draw 27.1 amps. If your breaker is rated at 30 amps and your generator is capable of approx 6 kw the 212 should run using your pig tail. You are going border line on this set up and may find that you cannot get full output from the 212 without tripping the breaker
on January 20, 2015
from Putnam CT 06260 asked:
December 17, 2014
I live 1/2 mile down a dead end street where where tractor trailer can't get in. If I bought a Millermatic 212 do you know what the closest freight terminal to my location where I could go to pick it up?
I live in Putnam CT 06260
Due to fraudulent practices in the past we not longer allow machines to be picked up at the terminals
on December 17, 2014
from HI asked:
December 3, 2014
What breaker size is needed to run this welder
At it's rated output the Millermatic 212 MIG Welder Auto-Set 907405 will draw 31.2 amps at 200 volts and at 230 volts it will draw 27.1 amps
on December 3, 2014
from Durango ,Co asked:
October 24, 2014
Does this have a 14pin connection that will allow me to run a RC8 feeder if I need to weld little further from the machine then normal ?
You cannot run an 8RC feeder off of a Millermatic 212 MIG Welder Auto-Set 907405
on October 24, 2014
from yucca valley ca asked:
October 7, 2014
if this is ordered and shipped to California is there sales tax?
If you purchase the Millermatic 212 MIG Welder Auto-Set 907405 and have it shipped to California there would be no sales tax
on October 7, 2014
from 'Merica asked:
August 28, 2014
What is the largest sized cylinder this unit can accommodate? 125,150,etc
Miller advises that the Millermatic 212 MIG Welder Auto-Set 907405 can hold up to a 300cf or T size cylinder on the cylinder rack/cart.
on August 29, 2014
from Boise Idaho asked:
August 4, 2014
Hi is 1788.00 with or without the rebate? Thanks
The price for the Millermatic 212 MIG Welder Auto-Set 907405 is $1788.00.If you choose to participate in the rebate program you will receive your rebate amount directly from Miller
on August 5, 2014
from az asked:
June 17, 2014
What is the maximum thickness it can weld
Miller rates the max weld thickness for the Millermatic 212 MIG Welder Auto-Set 907405 at 3/8" for both steel and aluminum
on June 18, 2014
from FLORIDA asked:
May 26, 2014
WHERE DOES THE GAS BOTTLE MOUNT
The Millermatic 212 MIG Welder Auto-Set 907405 has a platform behind the rear wheels where the cylinder mounts
on May 27, 2014
from Guam asked:
March 11, 2014
Will you ship to a freight forwarder? I am in the millitary and stationed on Guam which is a US territory.
We can ship the Millermatic 212 MIG Welder Auto-Set 907405 to a freight forwarder as long as he is located 48 states..
on March 12, 2014
from Baltimore, Maryland asked:
February 13, 2014
Hello. I need quotation for 2 Millermatic 212 Thanks.
Your cost for each 2 Millermatic 212 MIG Welder Auto-Set 907405 would be $3506.00
on February 14, 2014
from Columbus, Ms asked:
December 6, 2013
I saw in your power accessory section that you have the following extension cords...Direct Wire Extension Cord - 230 Volt , 25' or 50' 8/3 Would these be compatible with the Millermatic 212 Mig Welder throughout its application range? Since my only source of 230 volts is my dryer outlet I would love to be able to use it and not have to pay for additional 230 outlet installation.
Thanks for the info.
The Millermatic 212 MIG Welder Auto-Set 907405 will work properly with the Extension Cords. The only question that needs to answered is what type of receptacle you have on your dryer.. The Extension Cords have a NEMA 6-50 p style plug if your dryer has this type of receptacle then it is a direct plug in.
on December 9, 2013
from Goshen, Indiana asked:
September 1, 2013
Is this new or used?
Millermatic 212 MIG Welder Auto-Set 907405 is brand new direct from the factory.
on September 3, 2013
from Lake Asbury Fl asked:
July 19, 2013
In the information sheet it says the package comes with 15-ft 250-amp M-25 MIG gun for .030/.035-in wire. Does this mean that if you want to run .023 or the .045 you have to buy a new gun, is my in-experience making me miss something?
The Millermatic 212 MIG Welder Auto-Set 907405 comes set to run 030/035 wire .. If you plan on running .023 wire you will need to replace the gun liner (194010) the drive roll set (087131) and the contact tips (087299). The Millermatic 212 would not be a good choice to run .045 wire
on July 19, 2013
from florida asked:
July 8, 2013
what is the welding amperage of the machine
Millermatic 212 MIG Welder Auto-Set 907405 has a welding amperage from 30-210 amps.
on July 8, 2013
from Albany, OR asked:
June 28, 2013
I have a mm211 with spoolmate 100 - looking at the mm212 for the added features, including dual gun capability - would like to use .023 steel in spoolgun for tacking, light sheet metal and the included gun with .035 for heavier use. Will my spoolmate 100 hook up directly and work OK for this light duty? Thanks... Steve
The Spoolmate 100 spool gun cannot be used with the Millermatic 212 MIG Welder Auto-Set 907405.. The 212 is designed to work with the Spoolmatic 30a /15a or the Spoolmate 200
on July 2, 2013
from duluth mn asked:
March 23, 2013
Will the 100 series gun fit and work on this welder? I know its not rated for the max output.
Yes the Miller M100 gun will work on the Millermatic 212 MIG Welder Auto-Set 907405
on March 26, 2013
from Springfield, Mo asked:
July 31, 2012
What size breaker should I use for this machine and what size electrical wire?
Based on 208 volt or 230 volt input power, you should have a dedicated 30 amp breaker for your Millermatic 212. The 212 comes with 7' of 12/3 input power cable with a NEMA 6-50P plug installed. You should refer house/shop wiring questions to your electrician.
Thanks for your question.
on July 31, 2012
*Check box on right to select
Millermatic / Syncrowave 210 Protective Cover 195142
Miller Spoolmate 200 MIG Spoolgun 300497
Mfg Industrial Price:
Miller EZ-Change Dual Cylinder Rack with Elevated Cable Rack 300337
Miller .030 M-25 MIG Consumable Kit 234610
Mfg Industrial Price:
Miller .035 M-25 MIG Consumable Kit 234611
Mfg Industrial Price:
Miller .045 M-25 MIG Consumable Kit 234612
Mfg Industrial Price:
Miller Welding Helmet - Black Digital Elite Lens 257213
Mfg Industrial Price:
Miller Welding Jacket - INDURA® Cotton w/Leather Sleeves 231080
Mfg Industrial Price:
Call us toll free
Business Hours: M-F 7:30-7:30 EDT
Keep track with us!
VIEW FULL SITE
Copyright © 2017 Cyberweld
All Rights Reserved.
The Cyberweld© name, logo and the slogan "Weld with your mouse"© are registered service marks of J.W. Goodliffe & Son, Inc.
Welders & Plasma Cutters
Welding Helmets & Safety
Gas Apparatus & Cylinders
Welding Wire & Electrode
Shop All Brands